HSP 2017-2019 CHEVROLET / GMC L5P COLD AIR INTAKE

The 602-HSP is best known as the HSP Diesel L5P Cold Air Intake for the 2017-2019 L5P Duramax Equipped Chevrolet and GMC trucks.


Why would you need the HSP Diesel L5P Cold Air Intake for the 2017-2019 L5P Trucks?
The factory intake on the L5P Duramax engine is something that leaves power on the table. It is overall a choke point that is easily fixed. The L5P engine is a powerhouse right out of the box and seeing the factory intake that brings in less air than the truck demands can and will quickly become a problem.


What does the HSP Diesel L5P Cold Air Intake do differently?
The HSP Diesel L5P intake is a major change from the factory parts. To start we used a full metal assembly. With a large heatshield that takes allows for use of the ram air hood scoop that comes factory on these trucks. HSP Diesel also uses a metal mandrel-bent intake tube that uses smooth bends to create a radius that reduces the turbulence and increases the flow into the engine. This means more air that flows faster through the intake and gives the engine and turbocharger the air it is demanding. With no tuning required we have seen increases up to 20HP on average.


What comes with the HSP Diesel L5P Cold Air Intake?
(2) M4x.7x10mm Bolts
(4) Black Nylon Push-Type Retainers
(4) 1/8" Aluminum Rivets
(1) 4" - 4.5" 58° Reducer Boot
(1) 4" T-bolt Clamp
(1) 4.5" T-Bolt Clamp
(1) 4.5" Filter
(2) L5P Heatshield Box Pins
(2) M6-1.0 x 10mm Hex Head Bolts
(1) L5P Heatshield Box Grommet
(4) Heatshield Box Felt Washers
(17”) of Trim seal

Special note
This only fits the 2017-2019 L5P engines even though the Vin code is the same. This is due to small changes that were made in the engine bay. Please be sure you are ordering for the correct year truck.


What Does the HSP Diesel L5P Cold Air Intake fit?
L5P: 17-19 VIN Code Y