2001-2010 Chevrolet / GMC 70 Inch Bolt On Traction Bars 3.5 Inch Axle Diameter HSP Diesel

The HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter is something that works for everyone. This is a kit that works for stock trucks, drag trucks, street monsters, and more. You won't want to be the one missing out when it comes to our industry-leading kits.

Why Would you need an HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter kit?
The biggest thing to remember is that diesel trucks in particular are extremely front-end heavy. This is because of the heavy engine bays, plow setups, and systems that are common in the diesel industry. Because of all this heavy front weight and lack of weight over the rear tires combined with all of the torque that is made causes something called WHEEL HOP. Wheel hop is when the tires attempt to get traction and the wheels literally bounce up and down. Now while this sounds like it's not a big deal and it's almost funny, it is a much larger problem than you think. Wheel hop is not only dangerous in terms of driving but it can cause catastrophic failures of suspension systems, including but not limited to drive shafts, axles, yokes, and u-joints. As well we all have to remember if you are spinning you are not winning!

What does the HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter do Differently?
The biggest thing that the HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter does is plant your suspension. What we mean by this is we take different points of the axle and tie them into the frame. This then allows that power transfer to happen and helps keeps the axle from moving. When the axle is not moving while torque and power is attempting to be put down to the ground that power is now actually making its way to the ground. This makes a massive difference in the power you are putting down to the ground. These kits also come with top-of-the-line parts these are not the cheap traction bar kits you have seen before that eventually clunk or don't actually fit right. Those cheaper kits with less than stellar parts while you may think they look good are actually making the problem worse. Our kits are proven by drag racers, street monsters, and even everyday use. With millions of miles on our kits, we can stand by our product and say it will not only look the best but is going to work better than you could have ever hoped. Our kit is the easiest to install on the market and is a well-engineered affordable solution to help with wheel hop.

What comes with the HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter kit?

(8) 1/2"-13 x 1-1/4" Grade 8 Bolt
(16) 1/2" Washer
(8) 1/2"-13 Nylon Lock Nut
(2) 5/8" - 11 x 3-1/4" Grade 8 Bolt
(8) 5/8" Washer
(4) 5/8" - 11 Nylon Lock Nut
(2) Rod Ends with Nuts for Threaded End
(2) Polyurethane Bushings with Sleeves
What Does the HSP 58" Bolt-On Traction bars for 3.5in Axle Diameter kit fit?

LB7: 01-04 VIN Code 1
LLY: 04.5-05 VIN Code 2
LBZ: 06-07 VIN Code 2 or D
LMM: 07.5-10 VIN Code 6
How do people know the VIN code?
Engine code is dictated by the 8th character of the VIN number. The 10th character is the year of the truck.

*Special Note*
The 58-inch Traction bars are made to fit the REGULAR CAB 8FT bed sizes. If you are unsure what size you need we recommend calling us to confirm.

Overview

Complete Bolt-on for most Applications
Powder Coating options to fit your truck including custom colors
Upgraded Complete Rear Brackets for increased Strength
Easy to install And no special tools required
Allows you to put more power to the ground and actually get traction
Multiple Options of lengths available to make sure it fits right the first time